Final Prep & Initial Engine Start – Rebuild Video 12.5

Throttle and Cruise Control Wires

Throttle and Cruise Control Wires

After buttoning up the last few items (like bolting up the steering shaft, the last few screws, and the throttle and cruise control wires) it was time for fluids.  I put coolant, engine oil, power steering fluid, and transmission fluid in the car.

 

 

For the first test, there were no spark plugs, just a few drops of oil in the spark plug holes, and I pulled the fuel pump relay.  This way we did not have spark or fuel, but this is an important test to see if there was oil pressure.

I was actually shaking with the gauge went up to 60 psi letting me know I had oil pressure in the system.

Dash Gauge Showing Oil Pressure

Dash Gauge Showing Oil Pressure

 

Half way there!

 

Next it was time to put the spark plugs back in, put the fuel pump relay back in, hold my breath, and hope that the last 6 months of work wasn’t all for naught.  Those hundreds of hours, … and everything was riding on the turn of the key ……

Fuse Diagram Showing Fuel Pump Relay

Fuse Diagram Showing Fuel Pump Relay

So, check out the video, and be sure to check out my other videos, subscribe to my YouTube channel, and like and comment.   Thanks!

 

 

_________________________________________________________