Here is a somewhat exhaustive review of all the wires & sensors I could name for anyone who didn’t have anything as a reference.
I also show the wire loom that goes at the front of the oil pan and comes across to the passenger side that gets affixed to the oil pan on the passenger side.
The throttle body is easy, just 3 bolts and a couple of sensors (don’t forget the gasket)! Then I attach the EVAP to the top of the intake manifold and its associated screws and sensor.
I did not button everything up because I will still be doing an oil catch can later.
Next came the water pump. It was 6 bolts and very easy to put on. Don’t forget your gaskets!
So, check out the video, and be sure to check out my other videos, subscribe to my YouTube channel, and like and comment. Thanks!