Alright, so I’ve always wondered whether these headlight kits work or not. This is it right here. I’ll see if it works.
Alright, so it said step one was to clean the lens and then step two was to tape off these areas and let’s see what Step three is. Spread with this stuff, let is sit for 30 seconds and then wash, 30 seconds.
Alright, next step is to rinse this stuff off. Alright, 400 grit, 400 grit. Pretty cool. Alright, 1000 sand paper. I am supposed to be scrubbing this thing for 5 minutes a piece.
Open the packet, clarifying compound, a quarter sized dump on one of the white towels provided, rub all surfaces for five minutes. When complete rinse the lens and completely dry it off.
Alright and we’re supposed to wet it and completely dry it off.
Reapply surface activator. Activator for 30 seconds and thoroughly rinse with water. This will fully clean the lens in preparation.
Alright so we thoroughly dried it. Now we got to hit it with surface applicator again. After 30 seconds thoroughly rinse with water. Applicator.
Let’s go right here. Now we’re supposed to wait 4 to 6 hours.
All right, so done.
Is there a difference? And here’s that one. So, here’s the driver side and the passenger side.